AMPM Technical Sessions

Monday Morning, June 18

9:30–11:35 a.m.


Tungsten Carbide/ Cobalt

Session Chairman:
Joseph Tunick Strauss,
HJE Company, Inc.

159 USA 9:30 a.m.

Direct Metal Laser Sintering/Selective Laser Melting of
WC-12%Co Powders

Ravi K. Enneti,
Global Tungsten and Powders Corp.

171 USA 9:55 a.m.

3D Printing of WC-Co Using Binder Jet 3D Printing and Pressureless Melt Infiltration

Corson L. Cramer,
Oak Ridge National Laboratory

139 USA 10:20 a.m.

Complex Shapes of WC-Co Produced by Binder Jet 3D Printing

Paul Prichard,
Kennametal Inc.

161 USA 10:45 a.m.

Effect of Binder Saturation on the Green and Sintered Properties of WC-12%Co Processed via Binder Jet 3D Printing Process

Ravi K. Enneti,
Global Tungsten and Powders Corp.

129 Germany 11:10 a.m.

Additive Manufacturing of Cemented Carbides

Johannes Pötschke,
Fraunhofer IKTS


Binder Jet Processing

Session Chairman:
Michael Stucky,
Norwood Injection Technologies

277 USA 9:30 a.m.

Single Pass Jetting for Metal Additive Manufacturing

Rob Shydo,
Desktop Metal, Inc.

085 USA 9:55 a.m.

Comparison of Binder Jetting Additive Manufacturing to Press and Sinter 316L Stainless Steel

Alexander Zwiren,
GKN Hoeganaes

112 USA 10:20 a.m.

Material Developments in Binder Jet 3D Printing

Andrew Klein,

130 USA 10:45 a.m.

Sintering Behavior of H13 Tool Steel Fabricated via Binder Jet Additive Manufacturing

Peeyush Nandwana,
Oak Ridge National Laboratory

105 Sweden 11:10 a.m.

Sintering Study of Copper Parts Printed with Binder Jetting

Eric Bojestig,
Chalmers University of Technology

POWDERMET Technical Sessions

9:30–10:45 a.m.

Student Poster Sessions

9:30–10:45 a.m.

Special Interest Program

9:30–10:45 a.m.

AMPM Technical Sessions

Monday Afternoon

2:30–3:45 p.m.


Characterization I

Session Chairman:
Christopher T. Adam,
Carpenter Technology Corporation

212 USA 2:30 p.m.

No presentation scheduled at this time.

276 USA 2:55 p.m.

Powder Characterization Methods for Additive Manufacturing: Repeatability, Reproducibility and Relevancy

John L. Meyer,
Carpenter Technology Corporation

134 Canada 3:20 p.m.

Flowability of Powders: Adapting the Measurements to AM Requirements

Louis-Philippe Lefebvre,
National Research Council Canada


Stainless Steels

Session Chairman:
Joseph Capone,
Ametek, Inc.

156 USA 2:30 p.m.

Investigation of Corrosion Resistance Behavior of Laser-Powder Bed Fusion Printed 420 Stainless Steel

Sundar V. Atre,
University of Louisville

204 USA 2:55 p.m.

Investigation of Sintering Variables and Annealing Twin Boundary Microstructure of 316L Stainless Steel Fabricated via Binder-Jet System 3D Printing Using Water-Atomized Powder

Yu Zhou,
University of Pittsburgh

199 Portugal 3:20 p.m.

Optimizing Surface Quality of AISI 420 Stainless Steel Parts Manufactured by Selective Laser Melting

Daniel Gatões,
University of Coimbra

POWDERMET Technical Sessions

2:30–3:45 p.m.

Student Poster Sessions

2:30–3:45 a.m.

Special Interest Program

2:30–3:45 a.m.

AMPM Technical Sessions

Monday Afternoon

4:00–5:15 p.m.


Characterization II

Session Chairman:
Art Kracke,
AAK Consulting, LLC

111 Canada 4:00 p.m.

Flow Properties of Laser Powder Bed Fusion Feedstocks: Experimental and Simulation-based Characterization Study

Salah Eddine Brika,
École de Technologie Supérieure (ÉTS)

094 USA 4:25 p.m.

Defining Acceptance Criteria for AM Metal Powders Through the Use of Powder Rheology

John Yin,
Freeman Technology, Inc.

054 USA 4:50 p.m.

Applied Machine Learning and Computer Vision for the Qualification and Correlation of Additive Manufacturing Powder Feedstock

Anna C. Smith,
Carnegie Mellon University


Magnetic Materials

Robert M. Gasior,
Arconic Technology Center

017 USA 4:00 p.m.

Laser Additive Manufacturing of Magnetic Materials

Tushar Borkar,
Cleveland State University

142 USA 4:25 p.m.

Additive Manufacturing of Advanced Alnico Permanent Magnets

Emma M. White,
Ames Laboratory (USDOE)

137 Canada 4:50 p.m.

Cold Spray Additive Manufacturing of Rare-Earth Permanent Magnets

Fabrice Bernier,
National Research Council Canada

POWDERMET Technical Sessions

4:00–5:15 p.m.

Student Poster Sessions

4:00–5:15 p.m.

Special Interest Program

4:00–5:15 p.m.

Co-Located POWDERMET2018

Learn more about the co-located POWDERMET2018: International Conference on Powder Metallurgy & Particulate Materials.

Registration for either POWDERMET2018 or AMPM2018 provides full access to BOTH conferences.